Syrotech Modem Configuration – Step by Step
> **Important:** The exact menu names can differ by Syrotech model and ISP. The steps below cover the common Syrotech GPON/ONT interface.
### Step 1: Connect to the Modem
- Connect your phone or computer to the Syrotech modem using **Wi-Fi or LAN cable**.
- Make sure the **PON/Internet connection** is available.
### Step 2: Open the Login Page
Open Chrome and enter:
**192.168.1.1**
Then press Enter.
### Step 3: Login
Enter the **administrator username and password** provided by your ISP or printed on the modem label.
### Step 4: Configure WAN / Internet
Go to:
**Network → WAN**
or
**Network → WAN Settings**
Select the appropriate Internet connection type.
For a typical FTTH connection using PPPoE:
- **Connection Type:** PPPoE
- **Username:** Your ISP-provided PPPoE username
- **Password:** Your ISP-provided PPPoE password
- **VLAN ID:** Enter the VLAN ID given by your ISP, if required.
Then click **Apply/Save**.
### Step 5: Configure Wi-Fi Name
Go to:
**Network → WLAN → Basic**
Find **SSID / SSID Name**.
Example:
**SSID: MyFiber_5G**
Enter your desired Wi-Fi name and click **Apply/Save**.
### Step 6: Configure Wi-Fi Password
Go to:
**WLAN → Security**
Select the appropriate SSID and set:
- **Security:** WPA2-PSK or WPA2/WPA3, if available
- **Encryption:** AES
- **Pre-Shared Key:** Your new Wi-Fi password
Click **Apply/Save**.
### Step 7: Configure 2.4 GHz and 5 GHz
If your modem has dual-band Wi-Fi, configure both:
- **2.4 GHz:** SSID + password
- **5 GHz:** SSID + password
You can use the same name/password for both or separate names.
### Step 8: Check Internet Connection
After saving, go to the **Status/Device Information** page.
Check that:
- **PON:** Connected/Up
- **WAN:** Connected
- **Internet IP:** Assigned
Then test the internet on your phone or computer.
### Step 9: Important Settings
For normal home use, usually keep:
- **DHCP:** Enabled
- **NAT:** Enabled
- **DNS:** Auto, unless your ISP tells you otherwise
- **LAN IP:** Keep the default unless you have a specific reason to change it.
### Simple Configuration Flow
**Fiber Cable → Syrotech ONT → WAN/PPPoE → Internet**
**WLAN → SSID → Security → Wi-Fi Password**
If you want, **send a photo/screenshot of your Syrotech modem's configuration page**, and I can explain **each option one-by-one in English** according to your exact interface.
